• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 297 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL2-570LC43: Searching for User's Guide to LAUNCHXL2-570LC43

John Lu
Intellectual 275 points
Part Number: LAUNCHXL2-570LC43
Other Parts Discussed in Thread: BQ79616, TMS570LC4357

Tool/software:

Hello,

  • We are not able to find the User's Guide for the LAUNCHXL2-570LC43 eval board.
  • Also, although we have the BQ79600_UART_Sample_Code working on the LAUNCHXL2-TMS57012 eval board, and able to go through the connected BQ79600 eval board, to retrieve the voltage measurement data from the BQ79616 eval board, we are wondering what it takes, to revise such sample code and have it working on the LAUNCHXL2-570LC43 eval board as well?

Please advise. Thank you.

  • +1
    TI__Guru 70681 points

    Hi John,

    John Lu said:
    We are not able to find the User's Guide for the LAUNCHXL2-570LC43 eval board.

    I think it is not available for this device.

    Can you please refer schematic and quick start guide instead of it.

    Hercules TMS570LC43x Development Kit Quick Start Guide (ti.com)

    John Lu said:
    Also, although we have the BQ79600_UART_Sample_Code working on the LAUNCHXL2-TMS57012 eval board, and able to go through the connected BQ79600 eval board, to retrieve the voltage measurement data from the BQ79616 eval board, we are wondering what it takes, to revise such sample code and have it working on the LAUNCHXL2-570LC43 eval board as well?

    These controllers are not pin to pin compatible, you might use the high-level application code but you should need to change the driver level code to execute the code on TMS570LC4357.

    --
    Thanks & regards,
    Jagadish.