MSPM0G3507-Q1: How to use debugger on Citrix system

Jerry Kuo

Part Number: MSPM0G3507-Q1
Other Parts Discussed in Thread: SEGGER, MSPM0L2228, ENERGYTRACE

Tool/software:

Hi team,

My customer needs to use Citrix system to develop M0G FW. However, they cannot use XDS110. Could you help clarify ? Thank you.

Besides, customer said they can use XDS200 to develop C2000 on Citrix system. Could they use XDS200 to develop M0G MCU ?

Thank you.

10 months ago

0 Cash Hao11 10 months ago

TI__Mastermind 45685 points

Hi Jerry,

The XDS110 is not supported in Citrix system. Please refer to this link. https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum/743647/ccs-ccstudio-failed-to-connected-to-xds110-under-citrix-virtual-machine

The XDS200 can not be used for MSPM0 MCU.

Another thought is that you can check if Jlink or other 3rd party programmer which can debug MSPM0 MCU can work in Citrix system.

Best regards,

Cash Hao

0 Jerry Kuo 10 months ago in reply to Cash Hao11

TI__Expert 4320 points

hi Cash,

Customer find out XDS220 can be accessible via network by the remote CCS. So, customer ask if XDS220 can support MSPM0+ ?

0 Cash Hao11 10 months ago in reply to Jerry Kuo

TI__Mastermind 45685 points

Hi Jerry,

I do not think XDS220 can support MSPM0+ devices.

Best regards,

Cash Hao

0 Tate Chang 10 months ago in reply to Cash Hao11

Prodigy 20 points

Hi Cash,

Thanks for your information, but could you help to provide any information that 3rd party programmers which can debug MSPM0 MCU can work in Citrix system?

Best regards,

Tate Chang

0 Cash Hao11 10 months ago in reply to Tate Chang

TI__Mastermind 45685 points

Hi,

Let me check with our tools team to see if they know anything about it.

Best regards,

Cash Hao

0 Cash Hao11 10 months ago in reply to Cash Hao11

TI__Mastermind 45685 points

Hi Tate,

Feedback from our tools team, we do not know any debuggers can support MSPM0 and also work in Citrix. But you check on Segger or PEMicro debuggers. If they does not support Citrix, then we do not have anything more to provide.

Best regards,

Cash Hao

0 JohnS 10 months ago in reply to Cash Hao11

TI__Guru**** 162255 points

Tate,

XDS200 debug probes work with MSPM0.

This is CCS using a Blackhawk XDS200 to connect to my MSPM0L2228 LaunchPad.

Regards,

John

0 Cash Hao11 10 months ago in reply to JohnS

TI__Mastermind 45685 points

Hi John,

More feedback from team.

Looking into Citrix Virtual Machine, it appears to be Linux based off CentOS. We do support debugging on CentOS through our Linux driver and GDB Server Eclipse plug-in, however we do not support the PROG flash programming software on Linux. The Linux drivers can be downloaded through this link or by selecting "PEMicro Linux Drivers" under the Software Update download type on the documentation and downloads webpage. Note that an account is required to download the drivers.

The Multilink-Universal or Multilink-Universal-FX will work as a debug probe to target ARM Cortex-M devices with GDB server on an Eclipse based IDE. Is the customer intending to use Code Composer as their IDE? If so, they need to install the "C/C++ GDB Hardware Debugging" package from the CDT Update Site 10.6 (location: download.eclipse.org/.../) before installing the GDB server.

Best regards,

Cash Hao

0 Tate Chang 10 months ago in reply to JohnS

Prodigy 20 points

Hi John,

Thanks for your information. It seems like Blackhawk XDS200 supports MSPM0 to debug with CCS IDE.

@Cash Hao11

Hi Cash,

Is XDS200 fullly compatible with MSPM0 based on John's information?

0 JohnS 10 months ago in reply to Tate Chang

TI__Guru**** 162255 points

Tate,

XDS200 supports MSPM0.

One feature that XDS200 does not have as compared to the XDS110 is EnergyTrace.

Regards,
John

0 Cash Hao11 10 months ago in reply to JohnS

TI__Mastermind 45685 points

Hi,

I would agree John's comment. The SDX200 support SWD protocol. So, it should support MSPM0 devices.

Best regards,

Cash Hao

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM0G3507-Q1: How to use debugger on Citrix system