MSPM0C1104: BSL pins on MSPM0C

Darren Jenkins

Part Number: MSPM0C1104

Tool/software:

MSP team,

The datasheet for MSPM0C1104 does not have any pins labelled as BSL_invoke, BSLSDA, BSLSCL. Which pins should be used for the BSL?

Can you confirm that this device does in fact come loaded with the BSL in Flash when first purchased?

Thanks,
Darren

11 months ago

0 Dennis Lehman 11 months ago

TI__Guru 70726 points

Hi Darren,

Unlike the M0L and M0G families, the M0C does not feature an integrated BSL in ROM. User can add the BSL, referred to as secondary BSL, in FLASH. The customer could then define the BSL entry pin or use SW entry. Can use UART or I2C. There is example for M0C to do all of this in the SDK.

0 Darren Jenkins 11 months ago in reply to Dennis Lehman

TI__Genius 12471 points

Hi Dennis,

Thanks for the info. Programming the BSL won't be practical for this application.

Darren

0 Dennis Lehman 11 months ago in reply to Darren Jenkins

TI__Guru 70726 points

No, it's unfortunate but keep in mind this is a reduced cost device.

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM0C1104: BSL pins on MSPM0C