• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 483 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP-MSPM0G3507: lp-mspm03507

Ali Mousa
Intellectual 256 points
Part Number: LP-MSPM0G3507
Other Parts Discussed in Thread: MSPM0G3507

Tool/software:

Hello!

I am currently testing the Compartor on the ti mspm03507 and it is working, but there is no output voltage comming out. I tried with the SDK projects 

comp_analog_filter_LP_MSPM0G3507_nortos_ticlang

comp_lp_dac_vref_internal_LP_MSPM0G3507_nortos_ticlang

But It did not work why?

Best regards

Ali 

  • +1
    Guru 42085 points

    Did you set the Jumpers correctly? PA11 is also the UART output to the backchannel.

    • PA11 can be connected to XDS-110 backchannel, boosterpack connector or CAN/LIN connector:
      • To use on boosterpack connector and disconnect XDS-110:
        J22 2:3: Connect pin to J4_33
      • To use on J26 CAN/LIN connector:
        R63 is populated by default and connects pin to J26_6