MSPM0G3507: ADC is not working properly, in all setups as expected.

Ankush

Part Number: MSPM0G3507

Tool/software:

Hello, I am using the M0 controller, I am facing the issue regarding ADC, i had 7 number of setup and facing issues in 3 setup, where adc reading is zero,

Adc interupt is generated but the reading is still zero, hardware check is completed and it is ok. what must be the issue?

I am sending the screenshot for system config for adc and adc interrupt function.

over 1 year ago

0 Sal Ye over 1 year ago

TI__Mastermind 31205 points

Hi Ankush,

You can refer the setting in the SDK example project.

The configuration you showed is okay, but there are more settings you need to check.

B.R.

Sal

0 Sal Ye over 1 year ago in reply to Sal Ye

TI__Mastermind 31205 points

Hi Ankush,

Not hear the feedback from you for a while, I will close the thread temporarily.

Feel free to reply the thread if you have further question.

B.R.

Sal

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM0G3507: ADC is not working properly, in all setups as expected.