• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 105 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP432E401Y: Error connection to the target

Bala
Prodigy 130 points
Part Number: MSP432E401Y

Tool/software:

Hello Team,

While Flashing i am getting below error.

I tried flashing old codes as well which were working. Though i see below error.

Can you let me know how can i RESET my controller.


  • 0
    TI__Guru**** 184346 points

    Hi,

    Bala said:
    While Flashing i am getting below error.

      Is this error on the LaunchPad or your custom board? 

    Bala said:
    I tried flashing old codes as well which were working. Though i see below error.

    I'm confused. You first said flashing old code is working and then you said you see the error. If you can flash any code whether old or new, then you should be able to connect to the target. 

    Bala said:
    Can you let me know how can i RESET my controller.

    On the LaunchPad there is the reset button. I don't know how your RESET input is connected on your custom board. 

  • 0 in reply to Charles Tsai
    TI__Guru**** 184346 points

    Hi Bala,

      I have not heard back from you. I hope your issue is resolved.  I will close the thread for now. If you have any updates, you can write to this post again and the status will change to OPEN.