• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 169 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSPM0G3507: Jump to Specific Location

Krushna Thete
Intellectual 370 points
Part Number: MSPM0G3507
Other Parts Discussed in Thread: SYSCONFIG

Tool/software:

hi there,

I have successfully written an application hex to the NON-MAIN Flash of the MSPM0G3507, now we need to make the controller jump to the location and run the application, could anyone please guide me to achieve this.

  • 0
    TI__Genius 16000 points

    Hi Krushna,

    How have you written the new NONMAIN configuration? Was this manual or did you use Sysconfig?

    The configuration stored in NONMAIN is just a configuration, as long as you have set it correctly your device should still execute your boot code, and then your application. Are you having some problem when you attempt to flash NONMAIN? Do you have an application included in the binary, or is it a separate file?

    I am not clear on what you are attempting to do, please elaborate a bit more and I am happy to help you get your project working.