AM2732-Q1: AM273 SBL_UART uniflash fail

alisa song

Part Number: AM2732-Q1
Other Parts Discussed in Thread: UNIFLASH, AM2732

Tool/software:

Hi Ti support

I am studying the method about uart uniflash for AM2732 NZN, I have already flashed successful with JTAG.

Could you please check and guide why there have error? Thank you

0 Randy Rosales 7 months ago

Hi Alisa,

Is this custom hardware or are you using the AM273x EVM?

Can you to confirm that you have the correct UART boot mode selected? If this is on the AM273x EVM, this is set with the SOP[2:0] jumpers as shown here: https://software-dl.ti.com/mcu-plus-sdk/esd/AM273X/08_03_00_18/exports/docs/api_guide_am273x/EVM_SETUP_PAGE.html#BOOTMODE_UART

Thank you,

-Randy

0 Randy Rosales 7 months ago in reply to Randy Rosales

HI Alisa,

I haven't heard anything on this thread for a few days now. Please open a new thread if you still need assistance.

Thank you,

-Randy

Arm-based microcontrollers forum