• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 125 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSPM0G3507: MSPM0G3507

Daniel Aziz
Prodigy 50 points
Part Number: MSPM0G3507

Tool/software:

I get the below message and can not do any work !!

CS_DAP_0: Error connecting to the target:  DAP Connection Error. This could be caused by the device having gone to low power mode. Try forcing an external reset.If the error persists, try forcing BSL, a Mass erase or a Factory Reset. Check device FAQs for more information.

  • 0
    TI__Mastermind 18377 points

    Hi, Daniel

    Please try entering BSL mode first.

    BSL entering: When powering up, keep PA18 high, then M0 will enter BSL. or When Press Reset Pin, also press BSL PA18pin on launchpad, then release Reset pin, M0 will enter BSL mode.

    After entering BSL mode, then try download image or factory reset.

    Regards,

    Helic