Tool/software:
Hello,
I have the AM263x Arm®-based MCU general-purpose LaunchPad
development kit, and I'm trying to get a simple blink program and MCAN working. Despite my best efforts I am unable to get any sort of output from the board (except console outputs like "Hello World"). I've followed tutorials and looked through the forums but I can't seem to figure out what is causing this. I've also probed with an oscilloscope on both CAN and various GPIO outputs and there is nothing there. Nothing is throwing any errors so I don't know what sort of resources would be best to submit with this post, but I'll submit what i think could be useful. Thanks in advance for your advice!
