LP-AM263P: Not able to select the right Part Number for kit MCU in CCS

Navneet Singh

Part Number: LP-AM263P

Tool/software:

Hi TI Team,

Following is the Information Printed on the Main silicon (MCU) for the part on my dev kit.

However when I try to run the example code of i2c based LED blink, the code only gets flashed with the following part selected AM263x

if I try to use any of the AM263Px parts I get the following error

Can you please guide whats the error happening here, or am I reading the part info worng??

Best,
Navneet Singh

over 1 year ago

+1 Shaunak Deshpande over 1 year ago

TI__Mastermind 26572 points

Hi Navneet,

Q1. Can you please share the SDK and CCS version you are using?

Q2. Can you also share the boot-mode you are using?

Regards,
Shaunak

0 Navneet Singh over 1 year ago in reply to Shaunak Deshpande

Prodigy 20 points

SDK Version : mcu_plus_sdk_am263px_10_01_00_31

CCS Version : 12.8.1.00005

Boot Version :

+1 Shaunak Deshpande over 1 year ago in reply to Navneet Singh

TI__Mastermind 26572 points

Hi Navneet,

The Bootmode switch is configured in wrong state. It should be 0010 and in the image shared above it seems to be 1101. Can you please change the bootmode, power cycle and try again.

Regards,
Shaunak

0 Navneet Singh over 1 year ago in reply to Shaunak Deshpande

Prodigy 20 points

Shaunak,

Thanks a lot!! changing the boot mode worked.
I am curious which part is the right part for LP- AM263P kit tha I need to select in the ccxml file.

0 Shaunak Deshpande over 1 year ago in reply to Navneet Singh

TI__Mastermind 26572 points

Hi Navneet,

You can follow this documentation to setup your CCS and create .ccxml file: https://software-dl.ti.com/mcu-plus-sdk/esd/AM263PX/latest/exports/docs/api_guide_am263px/CCS_SETUP_PAGE.html

Regards,
Shaunak

Arm-based microcontrollers

Arm-based microcontrollers forum

LP-AM263P: Not able to select the right Part Number for kit MCU in CCS