LP-MSPM0G3507: MCU deadtime in FOC algorithm dynamically while the motor is running

Yogesh Naik

Part Number: LP-MSPM0G3507
Other Parts Discussed in Thread: MSPM0G3507, DRV8329

Tool/software:

Can we change the MCU deadTime in FOC algorithm dynamically while the motor is running in mspm0g3507. Currently using the FOC sensorless and the Gate driver used is DRV8329

over 1 year ago

0 Diego Abad Sajamin over 1 year ago

TI__Mastermind 20842 points

Hi Yogesh,
Let me consult with my team about it.

Best Regards,

Diego Abad

0 Yogesh Naik over 1 year ago in reply to Diego Abad Sajamin

Prodigy 120 points

Sure Please let me know at the earliest

0 Diego Abad Sajamin over 1 year ago in reply to Yogesh Naik

TI__Mastermind 20842 points

Hi Yogesh,
You should be able to change the value of the register inside your code (PERI_CONFIG Register.) Are you referring to whether you can change it after the code is executed/flashed? If that's the case, there isn't a way to put new code in the device without halting it.
Best Regards,
Diego Abad

Arm-based microcontrollers

Arm-based microcontrollers forum

LP-MSPM0G3507: MCU deadtime in FOC algorithm dynamically while the motor is running