SYSCONFIG: Inconsistency between Clock Tree view and SYSCTL configuration

Eugene K

Intellectual 340 points

Part Number: SYSCONFIG

Tool/software:

Standalone SysConfig 1.22.0+3893

mspm0_sdk_2_03_00_07

There seems to discontinuity between values displayed in the clock tree and values entered in SYSCTL module.

All clock tree dividers and summary seem to be wrong.

Regards,

Eugene

over 1 year ago

0 Zoey Wei over 1 year ago

TI__Genius 12891 points

Hi Eugene,

The sysctl and clock tree are two desperate way to configure clock.

If you enable clock tree, you can configure clock directly in clock tree.

Regards,

Zoey

0 Eugene K over 1 year ago in reply to Zoey Wei

Intellectual 340 points

Hi Zoey,

This makes little sense why in the same tool two views on basically the same data are not connected. There seems to also different level on data consistency checks.

Regards,

Eugene

0 Zoey Wei over 1 year ago in reply to Eugene K

TI__Genius 12891 points

Hi,

There are two ways to configure the clock. We do not keep them consistent at the moment because we believe that most customers will only choose one of them. The clock tree is also a configuration tool by definition, not a graphical tool for viewing the current sysctl configuration.

Regards,

Zoey

0 Zoey Wei over 1 year ago in reply to Zoey Wei

TI__Genius 12891 points

But anyway, thanks for your suggestion.

Zoey

Arm-based microcontrollers

Arm-based microcontrollers forum

SYSCONFIG: Inconsistency between Clock Tree view and SYSCTL configuration