• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 81 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSPM0G3519: SPI0 not working in MSPM0G3519

Meet Patel
Prodigy 50 points
Part Number: MSPM0G3519
Other Parts Discussed in Thread: SYSCONFIG

Tool/software:

We are facing issue while debugging TI demo code of "spi_controller_internal_loopcack_..." in MSPM0G3519 controller.

Whenever we debug and run the program to check SPI0 function, it terminate from debug mode. So, we are not able to debug it.

Below is the screenshot of error description we getting in console.

Below is screenshot of the configuration we have done for SPI0 in Syscfg.

So, Please suggest us any solution to resolve this issue.

  • 0
    TI__Genius 10012 points

    Hi Meet,
    I see you have the Eclipse version of CCS. TI discontinued that version and now recommends to use CCS 20.0.2. Here's what I recommend:

    1. Install the latest of CCS, and install/re-install your SDK and SYSCONFIG

    2. If the issue still persists, try to build another project and check if the same results appear

    If none of the previous work, I'll keep helping you out. 

    Best Regards,

    Diego Abad