• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 82 views
  • Users 0 members are here
Support feedback
Options
Options

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSPM0G3507: Sleep Mode

Krushna Thete
Intellectual 360 points
Part Number: MSPM0G3507

Tool/software:

Hello there,

Someone can please help me to achieve the lowest current consumption for MSPM0G3507.
I have written the below logic to put the device into the sleep mode, any help would be greatly appreciated.

Thanks & Regards,

Krushna Thete
Accolade Electronics Private Limited

  • 0
    TI__Genius 9782 points

    Hi Krushna,
    The lowest power mode we offer is the STANDBY1 mode. Keep in mind several peripherals are disabled in this power mode. For further clarification you can read the Datasheet's 7.5 Supply Current Characteristics and the Table 8-1. Supported Functionality by Operating Mode.

    Best Regards,

    Diego Abad

  • 0 in reply to Diego Abad Sajamin
    Intellectual 360 points

    Thanks for the response, Diego Abad

    Am I calling the right APIs to put the peripherals into the sleep or low power mode?

  • 0 in reply to Krushna Thete
    TI__Genius 9782 points

    Hi Krushna,
    You used the correct API call to set the device to STOP2 power mode in line 626. I want to remind you to review which modules are available and which remain the same after low-power modes since some modules lose their initial configuration after entering low-power modes.
    Best Regards,
    Diego Abad