• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 252 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSPM0L1106: How to debug firmware in Code Composer Studio by using Jlink?

Alan Chan
Prodigy 210 points
Part Number: MSPM0L1106
Other Parts Discussed in Thread: LP-MSPM0L1306, , MSPM0G3507

Tool/software:

Hi Team,

My firmware is developed base on LP-MSPM0L1306 EVB with Code Composer Studio without any problem.

Now, our product with MSPM0L1106 is ready. How do I config CCS to use Jlink to debug my firmware?

AlanC. 

  • +1
    TI__Mastermind 24485 points

    Hi AlanC,

    You can modify the ccxml to select the debugger you are preferring to use:

    This is an example for MSPM0G3507, while it will be the same step for MSPM0L1106.

    Make sure you have installed the J-Link module when you install the CCS.

    B.R.

    Sal