CC3220SF-LAUNCHXL: CC3220SF-LAUNCHXLWC S002(001)

Pavan kalyan nampelly

Part Number: CC3220SF-LAUNCHXL
Other Parts Discussed in Thread: SYSCONFIG

Tool/software:

I am trying to communicate the two CC3220SF-LAUNCHXMLWC S002(001) microcontrollers, by using UART, I am taking GPIO16 as Tx, and GPIO17 as Rx.

So,Please tell me what is the process to achieve communication, if much appreciated if we connect and solve this.

8 months ago

0 AB 8 months ago

TI__Mastermind 23646 points

Hello Pavan,

With the SDK and IDE installation we provided you with the sysconfig tool that allows you to configure different pins as different options.

when you open the example, you can click on the .syscfg file and configure it there.

Regards,

0 Pavan kalyan nampelly 8 months ago in reply to AB

Prodigy 10 points

Can you please elaborate it, or can u please connect with me?, I am unable to figure it , I have configured the pins, but in oscilloscope i can't able to see high line and low, but in hterm when i press reset the echoing characters is coming but i could not able to see in the oscilloscope.

0 AB 7 months ago in reply to Pavan kalyan nampelly

TI__Mastermind 23646 points

Hello Pavan,

You can follow our step by step guide found here:https://dev.ti.com/tirex/explore/node?node=A__AW04PjX42rzcD5ukT74xPQ__SIMPLELINK-ACADEMY-CC32XX__-LLELo7__LATEST

Here is a higher level explanation of the tool: https://dev.ti.com/tirex/explore/node?node=A__AEHLP4y8EiimafWwEqdjEQ__com.ti.SIMPLELINK_ACADEMY_CC13XX_CC26XX_SDK__AfkT0vQ__6.40.00.00

for a video training you can also follow this: https://www.ti.com/video/6098837940001

Regards,

Arm-based microcontrollers

Arm-based microcontrollers forum

CC3220SF-LAUNCHXL: CC3220SF-LAUNCHXLWC S002(001)