MSPM0G1105: XDS110 target flash memory write and erase problem

Hi, thanks for the question! Can you connect to the target and run a manual reset in CCS? Is this something that just started happening, or has it been doing this the whole time?

Hi Braian,

Thank you for your prompt comment.

>Can you connect to the target and run a manual reset in CCS?

I will check this with a software engineer.

I will report back after checking.

I only started debugging yesterday.

Best regards;

Hiroshi Yamada

Hi Brian,

Sorry for the spelling of your name incorrectly in my previous post. 

I checked.

If the following part of the CCS manual reset is correct, it cannot be used. (Non-Available)

 Is the part I'm targeting correct?

Best regards;

Hiroshi Yamada

Can you connect to the target in the debug tab, then under the "Scripts" tab, you will see an option to do a manual reset. 

Hi Brian,

Thank you for letting me know.

I will check it.

Currently, I have changed it to Erase Main only in the CCS Flash application, which has avoided the error.

Best regards;

Hiroshi Yamada