• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 301 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSPM0G3507: Combo hex flashing using UniFlash

Rohini Jadhav
Prodigy 60 points

Part Number: MSPM0G3507
Other Parts Discussed in Thread: UNIFLASH

Tool/software:

Hi Team,

I have created the combo hex(intel hex) file (Application + Bootloader) and am trying to flash it using UniFlash. However, I am encountering a "Load Failed" issue during the flashing process.

Bootloader has nonmain setting for disabling BSL invoke pin, and application has main setting only. 
For combo flashing through UniFlash we are setting up "Erase MAIN and NONMAIN necessary sectors only". Still, we are receiving error below,
Flashing two separate hex files in one go is working fine. 
Please help us for resolving this issue.

  • 0
    TI__Mastermind 27735 points

    Hi Rohini,

    I see the flash address is wrong.

    The NONMAIN is located in 0x41C0.0000-0x41C0.0200:

    It looks like when combined the two files, some issues occur.

    You can seperately download the Hex file, and then read back the combined one to see, what is the root cause.

    B.R.

    Sal