MSPM0C1104: What is the size of the Emulated EEPROM provided in the MSPM0C1104

Hi santhosh prem

May I know type A or type B you will used on your application?

Please refer to the detailed information as following. 

• Type A
  • Quick start guide for Type A - Emulate EEPROM with FLASH (Type A)
  • Design Description for Type A - EEPROM Emulation Type A Solution
  • SDK example code - eeprom_emulation_type_a
• Type B
  • Quick start guide for Type B - Emulate EEPROM With FLASH (Type B)
  • Design Description for Type B -  EEPROM Emulation Type B Design
  • SDK example code - eeprom_emulation_type_b

Thank you Xiaodong for your reply

Type A

Thank you for the reply, Since we have 2 sector totally 2KB of EEPROM Emulation is allocated i'm right.

Why I'm asking is since in the quick start guide, they have mentioned like this

EEPROM Emulation - 0x00001000 to 0x00017ff  -> 2047 bytes

Hi santhosh prem

EEPROM emulation code size is 2616bytes

data area will use 2 sectors at least which is 2Kbytes

total flash need is ~4.6K bytes

Thanks 

Thank you for your reply, how you are saying total flash is 4.6K bytes

Could you please provide your calcualtion

Hi santhosh prem

as the previous post, the eeprom emulation code size is 2.6K bytes, this solution will use at least 2 sector (one sector size is 1Kbytes).

So, the totally flash used will be 2.6+2 Kbytes = 4.6Kbytes

Thanks

Hello Xiaodong,

According to my understanding only 2 Kb used for reading and write. What we will do with remaining 2.6Kb

Little confusing with 2.6 K bytes

Hi santhosh prem

2 Kbyte is area for data store. 2.6K bytes is EEPROM emulation itself code size.

This is 2 sectors (2K bytes) is data area

This is EEPROM emulation code, code size is 2.6KB

Thanks