AM2434: Request to Functional safety FIT value and Failure Mode Distribution, Gate scale that meet Siemens standard SN29500

Sijia Zhu

Part Number: AM2434

Tool/software:

I inquire about the functional safety FIT(Application FIT Rate) value and failure mode distribution, Gate scale for AM2434.

Standard is SIEMENSE SN29500-2.

(it is not a request for a JEDEC-based technical fit value.)

PART NO.

AM2434BSFFHIALVR

4 months ago

0 Nihar Potturu 3 months ago

TI__Mastermind 19866 points

Hello,

Apologies for the delay here.

Sijia Zhu said:
Standard is SIEMENSE SN29500-2.

AM243x is only compliant to IEC61508 and we have not done analysis for the SN29500-2 standard.

You can go through the safety collateral available for AM243x from the link below.

https://www.ti.com/secureresources/AM64X-RESTRICTED-DOCS-SAFETY?

You can check the Safety Analysis report and check if that has the information you want.

Regards,

Nihar Potturu.

0 Sijia Zhu 3 months ago in reply to Nihar Potturu

Intellectual 310 points

Hello Nihar,

Thank you for your response.

I would like to move on to another topic.
Could you kindly help connect us with the AM243X team?

We would like to consult them regarding the recommended power ICs for the AM243X.

Your assistance would be greatly appreciated.

Best regards,
Sijia

0 Nihar Potturu 3 months ago in reply to Sijia Zhu

TI__Mastermind 19866 points

Hello Sijia,

Can you raise another thread with your questions regarding the power ICs. The thread would be assigned to the right team and they can help you further.

Regards,

Nihar Potturu.

Arm-based microcontrollers

Arm-based microcontrollers forum

AM2434: Request to Functional safety FIT value and Failure Mode Distribution, Gate scale that meet Siemens standard SN29500