MSPM0L1306: Deadband using TIMG

Kenley

Intellectual 1755 points

Part Number: MSPM0L1306

Tool/software:

Hi team,

Is it possible to set deadband using TIMG without using TIMA?

Because MSPM0L1306 do not have TIMA in my understanding but i want to add deadband for my system.

If it possible, it would be appreciated if you could help me on how to do the settings.

Regards,

Kenley

4 months ago

+1 Gary Gao 4 months ago

TI__Mastermind 39645 points

Hi Kenley,

It just can be realized by output two PWM from one time with different duty cycle, for example output two PWM output from TIMG8, and both output center-aligned, make one of the channel output inverted, if one using 200 in the CC value to control the duty cycle, there other one setting as 201 or other value depends on the deadband time you needed.

0 Kenley 4 months ago in reply to Gary Gao

TI__Intellectual 1755 points

Hi Gary,

Thank you!

Regards,

Kenley

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM0L1306: Deadband using TIMG