MSPM0G3519: MSPM0G3519 development env (debugger, IDE)

Varsha Phatak

Prodigy 10 points

Part Number: MSPM0G3519

Tool/software:

Hello

wanted to start development with MSPM0G3519. please guide me which IDE, debugger I should use.

also from where I can get example code.

over 1 year ago

0 Sal Ye over 1 year ago

TI__Mastermind 32395 points

Hi Varsha,

Recommend to use the CCS (TI ARM CLANG compiler inside), please use the version newer than 12.8.1 for M0G3519.

As for the debugger, recommend to use XDS110.

If you prefer other IDE, we also support Keil (5.38a+ version), IAR (better to use the latest, v9.60+); we aslo support other 3rd party debugger, like J-link (use latest software version, v8.x+)

B.R.

Sal

0 Varsha Phatak over 1 year ago in reply to Sal Ye

Prodigy 10 points

OK thanks Sal Ye

debugger your suggesting this one -> TMDSEMU110-U Debug probe | TI.com

also request to suggest evaluation board for same controller platform, that will really help.

+1 Sal Ye over 1 year ago in reply to Varsha Phatak

TI__Mastermind 32395 points

Hi Varsha,

Varsha Phatak said:
debugger your suggesting this one -> TMDSEMU110-U Debug probe | TI.com

Yes, we also has a cheaper version: https://www.ti.com/tool/LP-XDS110

And, in EVM board, it has built-in debugger in the board:

https://www.ti.com/tool/LP-MSPM0G3519

B.R.

Sal

0 Varsha Phatak over 1 year ago in reply to Sal Ye

Prodigy 10 points

Thanks Sal Ye

This was really helpful :)

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM0G3519: MSPM0G3519 development env (debugger, IDE)