MSPM0G3507: Request for Test Report of Subsystem examples function with CAN to UART

Eric Chen

Intellectual 1960 points

Part Number: MSPM0G3507

Tool/software:

Dear expert,

Our customer is showing strong interest in our CAN to UART solution and would like to better understand its performance characteristics.

Could you please provide a test report detailing the throughput and latency of this solution?

This information is crucial for the customer's evaluation and will greatly support our engagement with them.

Thank you for your support!

Best Regards,

Eric Chen

11 months ago

0 Sal Ye 11 months ago

TI__Mastermind 29635 points

Hi Eric,

We do not have the test report for this. This is the demo to show the functionality of the CAN to UART.

So, I can't give you the result of the throuhput. While for the latency, it is quite easy to test, and I can update some test result based on our project.

I would also appreciate if you can help share the information of the customer project. Please send it via email. Thanks!

B.R.

Sal

0 Eric Chen 11 months ago in reply to Sal Ye

TI__Intellectual 1960 points

Dear Sal,

Let's discuss this through mail.

Throughput data is needed for us to DIN, will that be hard to test?

Best Regards,

Eric Chen

+1 Sal Ye 11 months ago in reply to Eric Chen

TI__Mastermind 29635 points

Hi Eric,

I will close the thread and further discuss in the email.

B.R.

Sal

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM0G3507: Request for Test Report of Subsystem examples function with CAN to UART