MSPM0L1306: Can unused program memory flash be programmed at run-time?

Eric Christenson

Part Number: MSPM0L1306
Other Parts Discussed in Thread: , SYSCONFIG

Tool/software:

The MSPM0L1306 series datasheet gives fascinating hints (like giving the flash write and erase currents) that its program memory might be programmed at run-time to use for non-volatile program memory, and an example in Resource explorer under "Arm-based microcontrollers > Embedded Software > MSPM0 SDK > Examples > Development Tools > LP-MSPM0L1306 LaunchPad > EEPROM.

However, sysconfig doesn't mention a flash subsystem.

So is writing to unused program memory supported on the MSPM0L1306 series?

Thanks

Eric Christenson

4 months ago

0 Diego Abad Sajamin 4 months ago

TI__Genius 14662 points

Hi Eric,
Yes. You should be able to write to unused program memory. There are FLASH writing examples in our M0 SDK you can use to do this. We also have an EEPROM Emulation Design you can take a look.

Best Regards,

Diego Abad

0 Eric Christenson 4 months ago in reply to Diego Abad Sajamin

Prodigy 160 points

Seems like a good idea to integrate this with SYSCONFIG ... let Sysconfig reserve the program space areas and name them. Now I haveto design the logger records.

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM0L1306: Can unused program memory flash be programmed at run-time?