• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 90 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSPM0G3507: DSSM will not attach

Philip Neaves
Intellectual 310 points
Part Number: MSPM0G3507

Tool/software:

My device is locked up, can not do anything with it.

It has been fine for the last month...please note this.

So it's not cables, it's not USB ports, it's not the debug port, it's not theXDS110.... whatever...all have been fine for the last month until an hour ago...

So I am trying to use the DSSM tool

https://dev.ti.com/gallery/view/TIMSPGC/MSPM0_Factory_Reset_Tool/ver/1.0.2/

But it refuses to attach.

I have tried different browsers.

Any advice ?

Phil

  • 0
    TI__Mastermind 25570 points

    Hi Philip,

    Try invoking BSL then attaching the debugger. Hold NRST to low and BSL to high, release NRST then release BSL.

    By invoking the BSL you will be in bootcode and this will help prevent any settings or code execution in the application code which causes the device to not connect.