This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM263P4-Q1: I2C_SDA Falling Edge to Fast

Part Number: AM263P4-Q1

Tool/software:

Hi Team,

My customer's is connecting a gyro sensor to the AM263Px's I2C port. The I2C_SDA line falling edge is outside the range of the specification. Is there any issues that would arise with this on the MCU side?

Spec: 12ns~300ns

Measured Value: 423.5ps

Best regards,

Mari Tsunoda