• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 100 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

MSPM0G1105: When the power is turned off, drive the nRST pin to Low with a reset IC when the main power supply drops below...

MSPM0G1105: When the power is turned off, drive the nRST pin to Low with a reset IC when the main power supply drops below 14V, and set the IO pin to high impedance.

K.Z
Expert 2470 points
Part Number: MSPM0G1105

Tool/software:

Hi All,

Would you please share opinion on this thread?

MSPM0G1105: When the power is turned off, drive the nRST pin to Low with a reset IC when the main power supply drops below 14V, and set the IO pin to high impedance. - Arm-based microcontrollers forum - Arm-based microcontrollers - TI E2E support forums

Best Regards,

Ito