• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 76 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

*****

Adam Lancaster
Prodigy 41 points

Part Number: *****>

  • 0
    TI__Mastermind 45685 points

    Hi,

    I would suggest you to check the BSL invoke pin status.

    In your description, you do not mention how you enters the BSL. It could be through the hardware invoke PA18 pin. Make sure when you try to enter app code, the PA18 pin status should be LOW.

    Best regards,

    Cash Hao