MSPM0G3507: How to add sysconfig into an M0 example code which originally doesn't include sysconfig

Hi Jerry,

I would recommend open an empty project that has sysconfig then import the LFU example code into it that should solve the problem.

Best regards,

Bill

Hi Bill,

customer ask if we have some procedures about import LFU example into an empty RTOS project?

thank you 

Hi Jerry,

My apology, for RTOS version there is no sysconfig included but there is a work around. You are able to download the standalone SYSCONFIG through this link: https://www.ti.com/tool/SYSCONFIG?keyMatch=sysconfig&tisearch=universal_search.

Here are the steps once you download the SYSCONFIG 

• Open the SYSCONFIG then enter the package related information
• Then configure the device using the SYSCONFIG page
• After the configuration, then click on the two arrow sign. There are the files generated from SYSCONFIG you will need to include in the LFU project folder.
• 

I hope this helps to answer your question.

Best regards,

Bill

Hi Bill,

Appreciate for above solution. I will discuss with customer and feedback. Thank you.