[FAQ] AM263P4: Enabling GPIO interrupt in MCAL for AM263P4

jagadish gundavarapu

Part Number: AM263P4

Tool/software:

In this FAQ i will show you the configurations required to enable the interrupts for pins MCU_GPIO64 and MCU_GPIO63 in MCAL for AM263P4.

+1 jagadish gundavarapu 2 months ago

Port_pbcfg.c - pinmux and interrupt notification configuration:

Mcu_Pbcfg.c - Xbar configuration for interrupt:

Port_Cfg.h - Channel for the interrupt were made active:

Test application - interrupt configuration:

Arm-based microcontrollers forum