MSPM0C1103-Q1: how to erase the flash memory [MAIN Flash Erase Guidance for MSPM0C1103]

Tool/software:

• Hi team,

  I’m using the MSPM0C1103 device. The first time, I successfully flashed the board using CCS.
  But when I tried flashing a different binary the second time, it didn’t take — the original logic is still running.

  I tried using mass erase, but it appears to be unsupported for this device. Could you please guide me on:

  • How to properly erase the MAIN flash memory

  • Steps to ensure no logic is running on the board before reflashing

  Thanks,
  Ramalingam.P