• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 91 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS570LC4357: MIBSPI baudrate config in Halcogene

Louis crz
Prodigy 65 points
Part Number: TMS570LC4357


Tool/software:

Hi,

I want to initialize data format 0 to support a clock rate of up to 40 MHz with a baud rate of 6 Mbps. How should I set the baud rate in the Halcogene interface? This isn’t very clear to me.

Thank you for your help Slight smile

Louis

  • 0
    TI__Guru 73216 points

    Hi Louis,

    Louis crz said:
    I want to initialize data format 0 to support a clock rate of up to 40 MHz with a baud rate of 6 Mbps. How should I set the baud rate in the Halcogene interface? This isn’t very clear to me.

    I am not clear with your question. In SPI usually clock rate itself decides the baudrate as well. I mean if you configured you device in master and set your SPI clock as 40Mhz then you can send 40Mbps over SPI that means your baudrate would be 40Mbps only.

    --
    Thanks & regards,
    Jagadish.