TMDSEMU110-U: Replacement ribbon cable and adapters

Patrick Sullivan1

Part Number: TMDSEMU110-U

Tool/software:

My colleague has an XDS110 debugger and we have misplaced the ribbon cables and adapter boards that came with it. Is it possible to just buy those replacement parts anywhere?

3 months ago

0 Brennan Hartigan 3 months ago

TI__Genius 11960 points

Patrick,

You can purchase individual adapters through third-party vendors. Please refer to the JTAG adapter page here: https://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_jtag_adapters.html

For the ribbon cable, see the Debug Port section of the JTAG Connectors and Pinout Page: https://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_jtag_connectors.html#debug-port-

Regards,

Brennan

0 Patrick Sullivan1 3 months ago in reply to Brennan Hartigan

Prodigy 105 points

A lot of the links on the JTAG adapters page are dead.

The adapter we need is more expensive than a new debugger with everything included from TI. This doesn't make any sense.

0 Patrick Sullivan1 3 months ago in reply to Brennan Hartigan

Prodigy 105 points

Are you aware of any less expensive options?

0 Brennan Hartigan 3 months ago in reply to Patrick Sullivan1

TI__Genius 11960 points

Patrick,

There are less expensive options through other third-party vendors that are not on the TI recommended vendor list, such as AliExpress. We cannot guarantee the specifications or proper operation, but the price is much lower (~$15).

Regards,

Brennan

Arm-based microcontrollers

Arm-based microcontrollers forum

TMDSEMU110-U: Replacement ribbon cable and adapters