Tool/software:
I would like to implement Firmware OTA with two Flash Banks using a UART.
Does anyone have an example that I can start with? Or what resources should I look at?
Thank you.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
I would like to implement Firmware OTA with two Flash Banks using a UART.
Does anyone have an example that I can start with? Or what resources should I look at?
Thank you.
Hi Jerry,
We have one FOTA example using WIFI module and we linked it in below e2e, please go through it once:
--
Thanks & regards,
Jagadish.
Hi Jagadish,
Thank you for the prompt reply. Unfortunately the example in the above designated forum question doesn't have content. I get 404 Not Found message when connecting to:
http://processors.wiki.ti.com/index.php/LAUNCHXL2_RM57L:_CC3100_Wi-Fi_Demo
KR,
Jerry
Hi Jerry,
Refer below link once:
LAUNCHXL2-RM57L_5F00_-CC3100-Wi_2D00_Fi-Demo-_2D00_-Texas-Instruments-Wiki.pdf
--
Thanks & regards,
Jagadish.