LP-AM263P: LP-AM263P

Baruch Einziger

Part Number: LP-AM263P

Tool/software:

My LP-AM263P2 E2 has never been recognized by Code Composer Studio (CCS) since I first connected it. I’d appreciate guidance on how to bring the board up so CCS can detect it.

Thanks in advance!

Best regards,
Baruch Einziger

5 months ago

+1 Tejas Kulakarni 5 months ago

TI__Intellectual 2660 points

Hi Baruch,

Can you please try the below basic checks?

Has the board been powered on using a USB-C Power supply? Please refer to Section 3.1 Board Setup of AM263Px LaunchPad User Guide (Rev. A) for more details

If board is powered on properly, can you try the steps once mentioned in Section 4.2.2 XDS110 Debugger Bricking Issue of the same AM263Px LaunchPad User Guide (Rev. A) ?

Please do check and let us know.

Thanks,
Tejas Kulakarni

+1 Baruch Einziger 5 months ago in reply to Tejas Kulakarni

Intellectual 400 points

dear Tejas Kulakarni

i will do that one day i can't do it now. it saper to connect TP30 to ground.

thanks baruch

Arm-based microcontrollers

Arm-based microcontrollers forum

LP-AM263P: LP-AM263P