AM2434: What is effect of warm reset?

Zekun Bai

Part Number: AM2434

Tool/software:

I want to check below thing:

1. We use AM2434 and do the warm reset by confiture CTRLMMR_RST_CTRL Register SW_MAIN_WARMRST.

2. When call this warm reset, will the PLL configuration of SOC be re-configured?

Thanks

Zekun

0 Zekun Bai 5 months ago

We use ICSSG0 and ICSSG1, we care about if those 2 module PLL are reset and configured once the SW_MAIN_WARMRST is asserted.

Thanks

Zekun

0 Swargam Anil 5 months ago in reply to Zekun Bai

Hello Zekun,

When we do WarmReset, the device goes through the reset, which means the SOC freshly starts from RBL → SBL → Application.

So, all PLLs will be re-init.

Regards,

Anil.

0 Zekun Bai 5 months ago in reply to Swargam Anil

Hi Anil

Thanks Close this.

Regards

Zekun

Arm-based microcontrollers forum