LP-MSPM0G3507: Error: Exception occurred calling scripting.addModule(): No such resource: /ti/driverlib/GPIO.syscfg.js

Sherine Ismail

Part Number: LP-MSPM0G3507
Other Parts Discussed in Thread: SYSCONFIG

Tool/software:

Hi! The project I was working on was previously working fine and I was able to open up the syscfg file, but now when I try to open the syscfg file it generates the following error "Error: Exception occurred calling scripting.addModule(): No such resource: /ti/driverlib/GPIO.syscfg.js". I am able to flash and run the program normally and get the intended behavior, but I cannot open the syscfg file. What is going on and how do I fix this?

10 months ago

0 Luke Ledbetter 10 months ago

TI__Mastermind 27250 points

Hi Sherine,

Did you change any versions recently? This can happen when updating old versions of SYSCONFIG to a newer version. Check the project properties as well to verify the version used by the CCS project is correct.

Regards,
Luke

0 Sherine Ismail 10 months ago in reply to Luke Ledbetter

Prodigy 10 points

Hi Luke,

No I have not changed any versions. This is what I see when I check the project properties:

Could you provide further steps/clarification on what I should do next? Thanks for your help!

0 Luke Ledbetter 10 months ago in reply to Sherine Ismail

TI__Mastermind 27250 points

Hi Sherine,

Can you right click the .syscfg file and select the "Open With" option. A drop down menu will appear, select "Text Editor". This will give you the raw .syscfg information. Can you paste the screen shot? Here's an example of one of mine.

Arm-based microcontrollers

Arm-based microcontrollers forum

LP-MSPM0G3507: Error: Exception occurred calling scripting.addModule(): No such resource: /ti/driverlib/GPIO.syscfg.js