• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 111 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMDSEMU200-U: 3.3v pin

ali riza ictihadi
Prodigy 205 points
Part Number: TMDSEMU200-U
Other Parts Discussed in Thread: LAUNCHXL2-570LC43

Dear Jagadish;

I'm going to debug LAUNCHXL2-570LC43, by XDS200(TMDSEMU200-U)debug probe. This Debug probe has a 3.3v pin on its connector which will be shorted with 3.3 source voltage of the Evalboard . Should I disconnect 3.3v pin on debugger connector? 

My Best Regards

Ali Riza