AM62L: USB HUB DETECTION ISSUE WITH AM62L

Megha Agarwal

Part Number: AM62L

I have connected a USB3.0 hub with the USB1 of AM62L soc, the hub is not getting detected.
Are there any limitations to using hub with AM62L.
Can somone suggest anysolution related to this.
All voltages and reset are coming correctly.

16 days ago

0 Megha Agarwal 16 days ago

Prodigy 40 points

USB Hub part number is : USB5816C-I/KD

0 Bin Liu 16 days ago in reply to Megha Agarwal

TI__Guru**** 172861 points

Hi Megha,

The AM62L USB module compliant with the USB Spec, it shouldn't have issue in detecting USB hubs.

Do you run Linux on AM62L? If so, did you set dr_mode to "host" in devicetree for the USB port which connects the hub?

In your schematics the hub upstream port, where do the USB supper-speed signals (USB2_TXN/P and USB2_RXN/P) go to?

Arm-based microcontrollers

Arm-based microcontrollers forum

AM62L: USB HUB DETECTION ISSUE WITH AM62L