• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 66 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSPM0C1104: How to config PA1 as GPIO

Jerry Kuo
Expert 4575 points
Part Number: MSPM0C1104
Other Parts Discussed in Thread: SYSCONFIG

Hi team,

My customer is developing M0C1104. They want to config PA1(Reset) as GPIO. Please instruct how to do this. Thank you. 

  • 0
    TI__Expert 4060 points

    Hi Jerry,

    This can be done in SysConfig by configuring a GPIO as normal by selecting PA1/NRST/5 in the PinMux options. However, NRST should also be disabled in the SYSCTL section, or it can cause an unintended reset.

    Best Regards,
    Brian