• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 135 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM2434: New project cretion in CCS for the AM2434 -Launch pad

Josel Go
Expert 7355 points

Part Number: AM2434
Other Parts Discussed in Thread: SYSCONFIG

Hello TI E2E Team,

I am working with a TI MCU platform (AM243x / MCU+ SDK environment) and would like detailed guidance on creating a new project from scratch.

I request step-by-step instructions covering the following aspects:

  1. Recommended method to create a new project (SysConfig-based, example project import, or manual setup)

  2. Required tools and versions (Code Composer Studio 12.7v, MCU+ SDK, SysConfig 1.26v)

  3. Project structure and key generated files

  4. Clock, pinmux, and peripheral initialization flow

  5. How to add or enable drivers (e.g., GPIO, UART, TIMER, ADC)

  6. Build, load, and debug steps

  7. Common pitfalls or best practices when creating a custom project

If there is an official application note, user guide, or reference example that demonstrates this process clearly, please share the link.

This guidance will help me correctly structure my custom application instead of modifying existing examples.

Thank you for your support.

Best regards,
Chary
Embedded Software Engineer