AM263P4-Q1: Spi_MainFunction_Handling available only for SpiLevelDelivered 1 and 2

Hi,

Same issue is observed with MCAL_AM261x_11_01_00_11.

BR,
Shubham

Hi, 

We are looking into it internally. Will respond once there is an update. 

Regards, 
Pranav Siddappa

Hi Shubham, 

Abdul Mohasin Shaik said:

According with Autosar requirements this API should be available only for SpiLevelDelivered 1 and 2.

Can you attach the said requirement? 

Because SPI SWS clearly mentions for few APIs are to be enabled based on the levels like above, but for Spi_MainFunction_Handling there is nothing specified. Can you verify this?

Regards, 
Pranav Siddappa

Hi Pranav,

According with Autosar requirements:

• LEVEL 0 need to be configured for Synchronous behaviour, chapter 7.2.2
• LEVEL 1 asynchronous transmissions, chapter 7.2.3
• LEVEL 2 synchronous and asynchronous transmissions, chapter 7.2.5

The Spi_MainFunction_Handling need to be used in asynchronous transmissions.

BR,
Shubham

Hi Shubham, 

This seems to be an implicit understanding from SWS. The AUTOSAR chapter mentions no explicit requirement ID regarding this. 
Can you elaborate on why there is an error on your side? 

Regards, 
Pranav Siddappa

Hello Pranav, 

we are checking this issue internally, will update you soon

Regards, 

Mohasin

.