MSPM33C321A: Motor-Control SDK

Ibuki Endo

Part Number: MSPM33C321A

Hi experts,

Are there any plans to introduce a motor control SDK?

If so, we would appreciate it if you could share the expected release timeline.

If not, please let us know whether there are any documents, application notes, or guidelines available that describe how to port or migrate motor control firmware from MSPM0.

Best regards,

Ibuki Endo

22 days ago

0 Matthew Komitsky 22 days ago

TI__Expert 4040 points

Hi,

There are plans for a motor control SDK. We are aiming for a June release.

-Matthew

0 Ibuki Endo 22 days ago in reply to Matthew Komitsky

Prodigy 20 points

Hi experts,

Thank you very much for your response. It was greatly appreciated.

I have one additional question:
Are there any plans to release an SDK for Modbus?

Best regards,

Ibuki Endo

0 Matthew Komitsky 21 days ago in reply to Ibuki Endo

TI__Expert 4040 points

Hi,

Could you elaborate on what you're looking for?

-Matthew

0 Ibuki Endo 19 days ago in reply to Matthew Komitsky

Prodigy 20 points

Hi experts,

In order to connect an external device to an M33 using Modbus, a Modbus solution (for example, an SDK or software stack) for the M33 is required.
Reference：Modbus

Best regards,

Ibuki Endo

0 Matthew Komitsky 18 days ago in reply to Ibuki Endo

TI__Expert 4040 points

Hi,

I can forward this request to our software team, so they can evaluate it.

Could you provide more details about the application requirements?

-Matthew

0 Ibuki Endo 16 days ago in reply to Matthew Komitsky

Prodigy 20 points

Hi experts,

The primary use case is for end users to modify measurement parameters (configuration values).
Until now, a custom Modbus software implementation developed by individual engineers has been used. However, we believe that using an SDK‑provided Modbus solution would help reduce development effort and minimize dependency on specific individuals.

Best regards,

Ibuki Endo

0 Matthew Komitsky 16 days ago in reply to Ibuki Endo

TI__Expert 4040 points

Hi,

Thanks for the information. I will pass it along!

If you have a TI sales representative, then please also request it through them, so more detailed conversations can be had if you would like that kind of support.

Regards,

Matthew

0 Ibuki Endo 16 days ago in reply to Matthew Komitsky

Prodigy 20 points

Hi experts,

Got it, thank you.

Regards,

Ibuki Endo

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM33C321A: Motor-Control SDK