CAN Communication

HanSeoung Lyoo

Intellectual 320 points

Hi.

I have a question.

RM48 have a three of CAN Modules supporting of CAN 2.0 Part A(SPNU499).

TMS320LF2406 have a one of CAN Module supporting of CAN specification 2.0B(SPRS145L).

Is it possible to CAN Communicate Between RM48 and TMS320LF2406 ?

Thank you.

over 14 years ago

0 Sunil Oak over 14 years ago

TI__Mastermind 49120 points

Hello,

The TRM for the RM48 part needs to be updated to indicate that each of the three DCAN modules support CAN 2.0 Parts A and B. Thanks for identifying this error.

Regards, Sunil

0 HanSeoung Lyoo over 14 years ago in reply to Sunil Oak

Intellectual 320 points

Thank you for your reply.

0 Sunil Oak over 14 years ago in reply to HanSeoung Lyoo

TI__Mastermind 49120 points

Please confirm that your query has been answered by clicking on the "Verify Answer" button on the post that answers your question.

Best regards, Sunil

0 Tony Morrell over 13 years ago in reply to Sunil Oak

Genius 4130 points

Hi,

Is there a similar problem in the documentation for the TMS570LS31x/21x 16/32-Bit RISC Flash Microcontroller (SPNU499 September 2011)? This also states support for CAN protocol version 2.0 part A with no mention of Part B.

Regards, Tony.

0 Sunil Oak over 13 years ago in reply to Tony Morrell

TI__Mastermind 49120 points

Hi Tony,

Yes, the SPNU499 document is also being updated to indicate support for CAN2.0 parts A and B.

Regards, Sunil

Arm-based microcontrollers

Arm-based microcontrollers forum

CAN Communication