SYSCONFIG: SYSCONFIG: Request to always add Timer counter frequency to the generated H file

Eugene K

Part Number: SYSCONFIG
Other Parts Discussed in Thread: MSPM0G3519

Hello,

It seems that SYSCONFIG only generates timer counter frequency #define for PWM mode and does not create entry for other modes.

Is it possible to always! generate #define for any timer instance and mode as well as all other values that are set/calculated in SYSCONFIG GUI?

Regards,

Eugene

5 months ago

0 Ki 5 months ago

TI__Guru**** 485611 points

Hello,

Which device and SDK version are you working with?

Thanks

0 Eugene K 5 months ago in reply to Ki

Intellectual 400 points

Hi Ki,

All latest versions and MSPM0G3519:

SysConfig 1.26.2+4477

mspm0_sdk_2_10_00_04

Does it really matter? The point here is that all entries manually entered, calculated or otherwise, should probably get their own #defines in generated files.

Regards,

Eugene

0 Ki 5 months ago in reply to Eugene K

TI__Guru**** 485611 points

Thank you.

Eugene K said:
Does it really matter?

The device matters since certain aspects of SysConfig functionality is driven by the SDK being used. The owners of the SDK would be the device team.

I will bring this thread to their attention.

Thanks

0 Eugene K 5 months ago in reply to Ki

Intellectual 400 points

Hi Ki,

IMHO, the right thing to do is to support this across all the devices. It is very helpful feature of the toolset.

Regards,

Eugene

0 Diego Abad Sajamin 5 months ago in reply to Eugene K

TI__Mastermind 26312 points

Hi Eugune,

We appreciate the feedback. I recorded this request, and my team will add it to the backlog.

Best Regards,

Diego Abad

Arm-based microcontrollers

Arm-based microcontrollers forum

SYSCONFIG: SYSCONFIG: Request to always add Timer counter frequency to the generated H file