LAUNCHXL2-570LC43: Design, CAD files and BOM request

Dhir Gandhi

Hello,

I am unable to open the board files downloaded from the product page. When I try to open them using OrCAD, it shows that the files are corrupted.

Could you please share the latest board files compatible with OrCAD 24.1 or later?

Additionally, I would appreciate it if you could also share the BOM and CAD files for the board, if available.

1 month ago

0 jagadish gundavarapu 1 month ago

TI__Guru* 77936 points

Hi Dhir,

Apologies for the delayed response!

I mailed you BOM and regarding CAD files download refer below link and follow same procedure:

(+) RM57L843: x-y coordinate - Arm-based microcontrollers forum - Arm-based microcontrollers - TI E2E support forums

--
Thanks & regards,
Jagadish.

0 Dhir Gandhi 1 month ago in reply to jagadish gundavarapu

Prodigy 230 points

Hi Jagadish,
Thanks for sharing the BOM.

Regarding the CAD, I require the layout file of the launchpad, not the footprint. The one that's available on the product page is not opening in OrCAD and shows error.

0 jagadish gundavarapu 1 month ago in reply to Dhir Gandhi

TI__Guru* 77936 points

Hi Dhir,

Apologies for the delayed resposne!

Dhir Gandhi said:
Regarding the CAD, I require the layout file of the launchpad, not the footprint. The one that's available on the product page is not opening in OrCAD and shows error.

Are you still stuck with this issue?

--
Thanks & regards,
Jagadish.

0 Dhir Gandhi 1 month ago in reply to jagadish gundavarapu

Prodigy 230 points

Hello Jagadish,

Yes the issue is still there

+1 jagadish gundavarapu 1 month ago in reply to Dhir Gandhi

TI__Guru* 77936 points

Hi Dhir,

I found this from my senior colleague:

(+) TMS570LC4357: Not able to read Schematic File provided on the official website of TI - Arm-based microcontrollers forum - Arm-based microcontrollers - TI E2E support forums

The *.brd of launchpad is in Eagle layout format.

--
Thanks & regards,
Jagadish.