• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 57 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM263P4: How should the AM263P4 pin T4 be connected

yonglong ruan
Prodigy 10 points

Part Number: AM263P4
Other Parts Discussed in Thread: LP-AM263P

How should the AM263P4 pin T4 be connected? In the AM263P4 data sheet, pin T4 is configured to be directly connected (shorted) to ground (VSS), but in the LP-AM263P4 reference document, pin T4 is connected to 1.2V.

  • 0
    TI__Expert 3190 points

    Hi Yonglong,

    Please do connect T4 pin to VSS as suggested by datasheet. On LP-AM263P it is connected to 1.2V for some internal test purposes. Customers can connect T4 ball pin to GND as suggested in the datasheet.

    Thanks,
    Tejas Kulakarni