• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 105 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM263P4-Q1: 3-phase inverter evaluation board

Rishabh Kumar Bhakta
Prodigy 130 points

Part Number: AM263P4-Q1
Other Parts Discussed in Thread: DRV8300DRGE-EVM, TIDM-02018, BOOSTXL-3PHGANINV, LP-AM263

Hi ti team
we are currently carrying some motor testing with our am263px control card evk and right now we are using the drv8300drge-evm but when i read the user guide its saying irs only compatible to only c2000 board.
Which inverter evaluation board(part number) should we use for our am263px control card
TIA image.png

  • 0
    TI__Genius 9960 points

    Hi Rishabh,

    Most of our Launch Pad and EVMs can work together as they follow the same pin assignment across TI. The notes here shows that the ready-to-use SW is release for this EVM + the selected launch Pad (here LP-f28004).

    As for AM263P, you should change the pin assignment from a reference design. I recommend to start with TIDM-02018 code for AM263. The "BOOSTXL-3PHGANINV" and "LP-AM263" combination over there is quite similar to "DRV8300DRGE-EVM" and "AM263P4-Q1 launch Pad".

    Best Regards,

    Masoud