MSPM33C321A-Q1: .stp file required

Sophie Chen(DLP)

Prodigy 410 points

Part Number: MSPM33C321A-Q1

Hi team,

Could you please help to share the .stp 3D model file? We don't have such format file on the ti.com.

2 months ago

0 Zain Nasir 2 months ago

Expert 1500 points

The STEP model will be package-specific, so please confirm the complete orderable part number and package code, not only MSPM33C321A-Q1.

Normally, TI provides 3D models under the product page’s Design & development => CAD/CAE symbols section. If the model is not available there, the TI packaging team will need to publish or share the approved file. A generic model created from the mechanical drawing may help with preliminary clearance checks, but it should not be used for final enclosure or manufacturing validation.

0 Sophie Chen(DLP) 2 months ago in reply to Zain Nasir

TI__Prodigy 410 points

We are using M33C321AQPZRQ1. Could you please share the STEP model?

0 Keith Barkley 2 months ago in reply to Sophie Chen(DLP)

Guru 44225 points

I just rooted around on the TI website until I found a part with a similar package. I don't even remember which one now. But here is the .step I found.PZ0100A.stp

0 JOJO ARTHUR 2 months ago

TI__Intellectual 2560 points

Hello Sophie,

The internal system used in searching for the stp files is currently down. For the meantime, can you verify if the step file linked by Keith solves your needs here?

0 JOJO ARTHUR 2 months ago in reply to JOJO ARTHUR

TI__Intellectual 2560 points

Hello Sophie,

The step file Keith submitted should be the right one since the same naming was found in the ePOD database. Kindly find the attached. 0702.PZ0100A.stp

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM33C321A-Q1: .stp file required